차이

문서의 선택한 두 판 사이의 차이를 보여줍니다.

--- platform:ethercat:1_setup:10_config:start [2020/04/09 23:32]
216.244.66.234 ↷ 링크가 이동 작업으로 인해 적응했습니다
+++ platform:ethercat:1_setup:10_config:start [2024/07/08 18:23] (현재)
@@ 줄 1: / 줄 1: @@
-<TEXT align="center" size="medium"> **Configurator 및 Configuration 에 대한 안내 페이지입니다.**</text>
+=====Config=====
+<TEXT size="medium"> **Configurator 및 Configuration 에 대한 안내 페이지입니다.**</text>
 ----
-** Guide **
+<callout type="primary">
 \\
-  * [[platform:ethercat:1_setup:10_config:10_configurator| Configurator]]
+**Config**
+\\
+\\
+  * **[[platform:ethercat:1_setup:10_config:10_configurator| Configurator]]**
+  * **[[platform:ethercat:1_setup:10_config:20_configuration| Configuration]]**
+</callout>
-  * [[platform:ethercat:1_setup:10_config:20_configuration| Configuration]]
+<callout type="info">
 \\
-** Details **
+**Description**
+\\
+\\
+  * **[[platform:ethercat:1_setup:10_config:20_desc:00_project| Project 관리]]**
+    * Slave List 비교
-  * [[platform:ethercat:1_setup:10_config:20_details:20_netinfo| CycleTime : 통신주기 변경]]
+  * **[[platform:ethercat:1_setup:10_config:20_desc:05_setup| Setup : Configuration Option 설정]]**
-  * [[platform:ethercat:1_setup:10_config:20_details:20_physaddr| Address 변경]]
+  * **[[platform:ethercat:1_setup:10_config:20_desc:10_topologyview| TopologyView]]**
+    * Topology, AlStatus, AlStatus Error 확인,
+    * Port 상태, **InPort - OutPort 오삽입**,  DC Delay 확인
-  * [[platform:ethercat:1_setup:10_config:20_details:30_dcmode| 동기모드 변경]]
+  * **[[platform:ethercat:1_setup:10_config:20_desc:20_netinfo| Net Info]]**
+    * Cycle Time, Process Time, Logic Memory 확인
+    * DI, DO, AI, AO Channel Map
-  * [[platform:ethercat:1_setup:10_config:20_details:40_processdata| Process Data 변경]]
+  * **[[platform:ethercat:1_setup:10_config:20_desc:30_slaveinfo| Slave Info]]**
-\\
+    * Address, SyncMode, DeviceType 변경
-** Trouble Shooting **
-  * [[platform:ethercat:1_setup:10_config:ts:safeop_failed| SafeOP 전환에 실패하는 경우]]
+  * **[[platform:ethercat:1_setup:10_config:20_desc:40_processdata| Process Data]]**
+  * **[[platform:ethercat:1_setup:10_config:20_desc:45_slotinfo| Slot Info]]**
+  * **[[platform:ethercat:1_setup:10_config:20_desc:50_addressing| Addressing]]**
+    * IO Module에 대한 Channel Mapping 방식 설정
+    * Auto Addressing
+  * **[[platform:ethercat:1_setup:10_config:20_desc:60_dcdelay| Distibuted Clock Delay 측정]]**
+  * **[[platform:ethercat:1_setup:10_config:20_desc:70_reverse_connection|Reverse Connected Slave]]**
+  * **[[platform:ethercat:1_setup:10_config:20_desc:80_module_change|Module Change]]**
+</callout>
+<callout type="success">
+\\
+**Trouble Shooting**
+\\
+\\
+  * **[[platform:ethercat:1_setup:10_config:ts:10_scan_error| Scan Error]]**
-  * [[platform:ethercat:1_setup:10_config:ts:address_setup_failed| 드라이버의 주소 설정이 안되는 경우]]
+  * **[[platform:ethercat:1_setup:10_config:ts:50_device_boot_failed | Master Device 초기화 실패]]**
+  * **[[platform:ethercat:1_setup:10_config:ts:20_address_read_failed| 주소 확인 실패]]**
-  * [[platform:ethercat:1_setup:10_config:ts:unknown_slave| Unknown Slave 가 표시되는 경우]]
+  * **[[platform:ethercat:1_setup:10_config:ts:60_master_invisible| Master-DC 확인 실패]]**
-  * [[platform:ethercat:1_setup:10_config:ts:connect_check| 스캔이 되지 않는 슬레이브가 있는 경우]]
+  * **[[platform:ethercat:1_setup:10_config:ts:30_safeop_failed| OP 전환 실패]]**
+</callout>