Config

문서의 선택한 두 판 사이의 차이를 보여줍니다.

차이 보기로 링크

--- platform:ethercat:1_setup:10_config:start [2020/04/14 14:36]
winoars
+++ platform:ethercat:1_setup:10_config:start [2024/07/08 18:23] (현재)
@@ 줄 1: / 줄 1: @@
-====Config====
+=====Config=====
 <TEXT size="medium"> **Configurator 및 Configuration 에 대한 안내 페이지입니다.**</text>
 ----
 <callout type="primary">
-===Guide===
+\\
+**Config**
+\\
 \\
   * **[[platform:ethercat:1_setup:10_config:10_configurator| Configurator]]**
@@ 줄 12: / 줄 14: @@
 <callout type="info">
-===Description===
+\\
+**Description**
+\\
 \\
   * **[[platform:ethercat:1_setup:10_config:20_desc:00_project| Project 관리]]**
@@ 줄 40: / 줄 44: @@
   * **[[platform:ethercat:1_setup:10_config:20_desc:60_dcdelay| Distibuted Clock Delay 측정]]**
-  * **[[platform:ethercat:1_setup:10_config:20_desc:70_reverse_connetion|Reverse Connected Slave]]**
+  * **[[platform:ethercat:1_setup:10_config:20_desc:70_reverse_connection|Reverse Connected Slave]]**
   * **[[platform:ethercat:1_setup:10_config:20_desc:80_module_change|Module Change]]**
@@ 줄 46: / 줄 50: @@
 <callout type="success">
-===Trouble Shooting===
 \\
-  * **[[platform:ethercat:1_setup:10_config:ts:safeop_failed| SafeOP 전환에 실패하는 경우]]**
+**Trouble Shooting**
+\\
+\\
+  * **[[platform:ethercat:1_setup:10_config:ts:10_scan_error| Scan Error]]**
-  * **[[platform:ethercat:1_setup:10_config:ts:address_setup_failed| 드라이버의 주소 설정이 안되는 경우]]**
+  * **[[platform:ethercat:1_setup:10_config:ts:50_device_boot_failed | Master Device 초기화 실패]]**
+  * **[[platform:ethercat:1_setup:10_config:ts:20_address_read_failed| 주소 확인 실패]]**
-  * **[[platform:ethercat:1_setup:10_config:ts:unknown_slave| Unknown Slave 가 표시되는 경우]]**
+  * **[[platform:ethercat:1_setup:10_config:ts:60_master_invisible| Master-DC 확인 실패]]**
-  * **[[platform:ethercat:1_setup:10_config:ts:connect_check| 스캔이 되지 않는 슬레이브가 있는 경우]]**
+  * **[[platform:ethercat:1_setup:10_config:ts:30_safeop_failed| OP 전환 실패]]**
 </callout>