차이

문서의 선택한 두 판 사이의 차이를 보여줍니다.

차이 보기로 링크

양쪽 이전 판 이전 판
다음 판
이전 판
platform:ethercat:70_users_guide:10_howto:station_alias_selection_change [2020/04/16 10:46]
winoars
platform:ethercat:70_users_guide:10_howto:station_alias_selection_change [2024/07/08 18:23] (현재)
줄 20: 줄 20:
 === Rotary Switch를 사용하지 않거나 Rotary Switch가 없는 경우=== === Rotary Switch를 사용하지 않거나 Rotary Switch가 없는 경우===
 \\ \\
-  * Address를 원하는 값으로 변경하거나, (**[[platform:ethercat:1_setup:10_config:20_details:20_physaddr| Address 변경]]** 참조)+  * Address를 원하는 값으로 변경하거나, (**[[platform:ethercat:1_setup:10_config:20_desc:30_slaveinfo#address_setup| Address 변경]]** 참조)
  
   * 우측 하단의 <btn size="xs"> Apply AutoAddress To Servo </btn> 버튼을 클릭하여 자동으로 Address를 부여합니다.   * 우측 하단의 <btn size="xs"> Apply AutoAddress To Servo </btn> 버튼을 클릭하여 자동으로 Address를 부여합니다.