PCI Pulse Signal

문서의 선택한 두 판 사이의 차이를 보여줍니다.

차이 보기로 링크

--- platform:pulse:intro:io_signals [2019/01/11 19:10]
winoars 만듦
+++ platform:pulse:intro:io_signals [2024/07/08 18:23] (현재)
@@ 줄 26: / 줄 26: @@
   * **[[platform:pulse:info:interface:signal_etc | Position compare output pin]]** : CMP
-  * **[[platform:pulse:info:interface:motioncontrol_signalPulsar signal input pin]]** : PA and PB
+  * **[[platform:pulse:info:interface:motioncontrol_signal | Pulsar signal input pin]]** : PA and PB
   * Simultaneous Start/Stop signal I/O pins: STA and STP
@@ 줄 33: / 줄 33: @@
 <callout type="info">
-===Applicable Motors===
+===Digital Input===
 \\
-  * Stepping motors
+  * Optical Isolated Input
-  * AC or DC servomotors with pulse train input servo drivers
+  * Opto-isolator : TLP280-4
+  * Input Range : 5 to 24VDC
+  * Isolation : 1000V Channel to Channel
+  * Low Voltage Level : 0V ~ 1.5V
+  * High Voltage Level : 5V ~ 24V
+  * Input Impedance : 3.6 KΩ
+  * COMI-LX534 제품에는 Digital Input이 없으며 확장 모듈인 COMI-TM402 (32 DO), COMI-TM403 (32 DI), COMI-TM404 (16/16 DI/O)를 선택적으로 확장할 수 있습니다
 </callout>
 <callout type="success">
-===Power Consumption===
+===Digital Output===
 \\
-  * Slot power supply(input): +5V DC ±5%, 900mA max.
+  * Optical Isolated Output
+  * Output Type : Darlington TR with common ground
+  * Output Device : ULN2803A
+  * Output voltage : 5V ~ 35V
+  * Sink Current : Max 500 mA/Channel
+  * Isolation Voltage : 2500 Vrms
+  * Throughput : 10 KHz (0.1ms)
-  * External power supply(input): +24V DC ±5%, 500mA max.
+  * Response Time : 20 ㎲
-  * External power supply(output): +5V DC ±5%, 500mA max.
+  * COMI-LX534 제품에는 Digital Output이 없으며 확장 모듈인 COMI-TM402 (32 DO), COMI-TM403 (32 DI), COMI-TM404 (16/16 DI/O)를 선택적으로 확장할 수 있습니다
 </callout>