Config

이 문서는 읽기 전용입니다. 원본을 볼 수는 있지만 바꿀 수는 없습니다. 문제가 있다고 생각하면 관리자에게 문의하세요.
=====Config=====
<TEXT size="medium"> **Configurator 및 Configuration 에 대한 안내 페이지입니다.**</text>
----
<callout type="primary">
\\
**Config**
\\
\\
  * **[[platform:ethercat:1_setup:10_config:10_configurator| Configurator]]**

  * **[[platform:ethercat:1_setup:10_config:20_configuration| Configuration]]**

</callout>

<callout type="info">
\\
**Description**
\\
\\
  * **[[platform:ethercat:1_setup:10_config:20_desc:00_project| Project 관리]]**
    * Slave List 비교

  * **[[platform:ethercat:1_setup:10_config:20_desc:05_setup| Setup : Configuration Option 설정]]**

  * **[[platform:ethercat:1_setup:10_config:20_desc:10_topologyview| TopologyView]]**
    * Topology, AlStatus, AlStatus Error 확인,
    * Port 상태, **InPort - OutPort 오삽입**,  DC Delay 확인

  * **[[platform:ethercat:1_setup:10_config:20_desc:20_netinfo| Net Info]]**
    * Cycle Time, Process Time, Logic Memory 확인
    * DI, DO, AI, AO Channel Map

  * **[[platform:ethercat:1_setup:10_config:20_desc:30_slaveinfo| Slave Info]]**
    * Address, SyncMode, DeviceType 변경

  * **[[platform:ethercat:1_setup:10_config:20_desc:40_processdata| Process Data]]**

  * **[[platform:ethercat:1_setup:10_config:20_desc:45_slotinfo| Slot Info]]**

  * **[[platform:ethercat:1_setup:10_config:20_desc:50_addressing| Addressing]]**
    * IO Module에 대한 Channel Mapping 방식 설정
    * Auto Addressing

  * **[[platform:ethercat:1_setup:10_config:20_desc:60_dcdelay| Distibuted Clock Delay 측정]]**

  * **[[platform:ethercat:1_setup:10_config:20_desc:70_reverse_connection|Reverse Connected Slave]]**

  * **[[platform:ethercat:1_setup:10_config:20_desc:80_module_change|Module Change]]**
</callout>

<callout type="success">
\\
**Trouble Shooting**
\\
\\
  * **[[platform:ethercat:1_setup:10_config:ts:10_scan_error| Scan Error]]**
 
  * **[[platform:ethercat:1_setup:10_config:ts:50_device_boot_failed | Master Device 초기화 실패]]**

  * **[[platform:ethercat:1_setup:10_config:ts:20_address_read_failed| 주소 확인 실패]]**

  * **[[platform:ethercat:1_setup:10_config:ts:60_master_invisible| Master-DC 확인 실패]]**

  * **[[platform:ethercat:1_setup:10_config:ts:30_safeop_failed| OP 전환 실패]]**
</callout>